Midgrab In line Chain Shortener (MIG)

  • Available in either a REMOVABLE or NON-REMOVABLE model
  • Removable can be quickly added anywhere along the chain leg, then adjusted along the leg in either direction from the fitting.
  • No reduction in Working Load Limit in a shortened leg
  • When not in use the fitting can sit in an idle position, not carrying a load
  • Full traceability
  • Proof tested and certified

Removable

MODEL CHAIN
SIZE
WORKING LOAD
LIMIT
DIMENSIONS WEIGHT
EACH
  Inches**

* (Lbs) at 90°

L A B lbs
MIG CC-8-10 5/16 5,700 3.7 2.0 2.4 1.4
MIG CC-10-10 3/8 8,800 4.9 2.8 3.0 2.4
MIG CC-13-10 1/2 15,000 5.9 3.5 3.1 5.7
MIG CC-16-10*** 5/8 22,600

With Close/Open Device on Either End

*  Design Factor 4:1 Proof tested and certified
**For use with GrabiQ only   ***Under development


Non-Removable

MODEL CHAIN
SIZE
WORKING LOAD
LIMIT
DIMENSIONS WEIGHT
EACH
  Inches**

(Lbs) * at 90°

L A B lbs
MIG CL-8-10 5/16 5,700 3.7 2.0 2.4 1.4
MIG CL-10-10 3/8 8,800 4.9 2.8 3.0 2.4
MIG CL-13-10 1/2 15,000 5.9 3.5 3.1 5.7
MIG CL-16-10 5/8*** 5/8 22,600

With close/open device on one end & locking device on opposite end.
*  Design Factor 4:1 Proof tested and certified
** For use with GrabiQ chain only    *** Under development
mig-midgrab-shortener-diagrammig-midgrab-shortener-nonrem-diagram